infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Recall - Propeller Shaft Bolt Replacement|Page 8573 > < Axle Nut|Specifications
Page 1
background image

Technical Service Bulletin # 03-032

Date: 030521

Recall - Propeller Shaft Bolt Replacement

Reference:
ITB03-032

Date:
May 21, 2003

VOLUNTARY RECALL CAMPAIGN 
PROPELLER SHAFT

CAMPAIGN I.D. # 1 NHTSA # : 
R3010 / 03V-164

APPLIED VEHICLES:
2003 FX35 (S50) - 2WD and AWD models
2003 FX45 (S50)

APPLIED VINS:
FX45: 
JNRBS08W*3X000051 to 002394 
JNRBS08W*3X400147 to 401816

FX35 (2WD): 
JNRAS08U*3X000014 to 001366 
JNRAS08U*3X100074 to 101640

FX35 (AWD): 
JNRAS08W*3X000028 to 004168 
JNRASO8W*3X200151 to 203318

NOTE:

Confirm campaign eligibility using Infiniti-net.

INTRODUCTION

Infiniti has determined that some 2003 model year Infiniti FX35 and FX45 vehicles may have a defect which relates to motor vehicle safety. The bolts
which attach the propeller shaft(s) to the transmission and differential(s) may not have been adequately tightened. It the bolts come loose, the propeller
shaft(s) may come off the vehicle which could result in a crash. To prevent this condition from occurring, Infiniti is conducting a Voluntary Safety Recall
Campaign to replace all of the propeller shaft bolts and tighten them to the proper specification.

IDENTIFICATION NUMBER

Nissan has assigned identification number R301 0 to this campaign. This number must appear on all communications and documentation of any nature
dealing with this Campaign.

NUMBER OF VEHICLES POTENTIALLY AFFECTED

The number of vehicle potentially affected is approximately 165.

DEALER RESPONSIBILITY

It is the retailer's responsibility to check Infiniti Net for the campaign status on each vehicle falling within the range of this voluntary safety recall which
for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles
in a dealer's inventory.

Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can
result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Infiniti strongly
encourages dealers to correct any used vehicles in their inventory before they are retailed.

SERVICE PROCEDURE 2WD Models

^

Install new bolts that hold the Rear Propeller Shaft to the Rear Differential Companion Flange. Refer to "Procedure A" (below). AWD Models

^

Install new bolts that hold the Rear Propeller Shaft to the Rear Differential Companion Flange. Refer to "Procedure A" (below).

Recall - Propeller Shaft Bolt Replacement|Page 8573 > < Axle Nut|Specifications