FX35 RWD V6-3.5L (VQ35DE) (2003)
3. AIR KNIFE METHOD
-
An air knife is used to cut glued windshield sealant.
-
The windshield sealant is cut while the blade cuts at high frequency by air pressure.
-
It is composed of five blades of different sizes.
-
It allows access to areas without damaging exterior painting and moldings.
-
Working inside the vehicle, just one operation is required.
-
Working hours can be reduced.
4. USE OF A CUTTER KNIFE
* A cutter knife may be used to cut around the edge prior to using the windshield knife.
NOTE: Be careful not to scratch the panel.
3. REMOVAL, INSPECTION AND CLEANING OF GLASS
1. WHEN GRASS IS NOT BROKEN.
-
From the outside, using glass holders, remove the glass from the forward position.
-
Scrape off old adhesive.
-
Use alcohol or similar cleaning solvent to clean the glass.
-
Inspect the glass thoroughly for scratches and dirt.
-
Remove dam rubber.
2. WHEN GLASS IS BROKEN.
-
While cutting the sealant with the knife, remove pieces of broken glass.