FX35 RWD V6-3.5L (VQ35DE) (2003)
b.
Close the door and allow the window to raise to its normal closed position.
c.
Using the lower edge of the roof line as a guide:
Mark the window position with a pen (see Figure 3).
NOTE:
This marked position will be used to set the window adjustment when it is reinstalled.
FOR G35 COUPE AND SEDAN, AND FX45/35:
1.
Remove the door module assembly from the side that is making noise.
^
Refer to the Service Manual (ESM) section GW for removal instructions.
2.
Clean/wipe off all of the old existing grease from the front window regulator slide rail.