FX35 RWD V6-3.5L (VQ35HR) (2010)
Forward Looking Camera: Service and Repair
Removal and Installation
Navigation (Single Monitor)
FRONT CAMERA
Removal and Installation
REMOVAL
1. Remove front camera finisher.
2. Remove front camera mounting rivet.
3. Remove front camera.
INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. See: Testing and Inspection/Programming and Relearning/Calibrating Camera Image (Around View
Monitor)/Work Procedure/Navigation (Single Monitor).
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera,
removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.
Navigation (Twin Monitor)
FRONT CAMERA
Removal and Installation
REMOVAL
1. Remove front camera finisher.
2. Remove front camera mounting rivet.
3. Remove front camera.
INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. See: Testing and Inspection/Programming and Relearning/Calibrating Camera Image (Around View
Monitor)/Work Procedure/Navigation (Twin Monitor).
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera,
removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.