FX35 RWD V6-3.5L (VQ35HR) (2010)
3. Remove door mirror cover. See: Body and Frame/Mirrors/Service and Repair/Outside Mirror/Door Mirror Assembly/Exploded View/Without
ADP (without
ADP), See: Body and Frame/Mirrors/Service and Repair/Outside Mirror/Door Mirror Assembly/Exploded View/With ADP (with ADP).
4. Remove screws (A) and connector (1), and then remove side camera finisher assembly (LH).
5. Remove side camera (LH) mounting screws
6. Remove side camera (LH).
INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. See: Testing and Inspection/Programming and Relearning/Calibrating Camera Image (Around View
Monitor)/Work Procedure/Navigation (Twin Monitor).
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera,
removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.