FX35 RWD V6-3.5L (VQ35HR) (2010)
2. Remove screws (A) and actuator connector, and then actuator
(1).
3. Remove door mirror cover. See: Body and Frame/Mirrors/Service and Repair/Outside Mirror/Door Mirror Assembly/Exploded View/Without
ADP (without
ADP), See: Body and Frame/Mirrors/Service and Repair/Outside Mirror/Door Mirror Assembly/Exploded View/With ADP (with ADP).
4. Remove screws (A) and connector (1), and then remove side camera finisher assembly (RH).
5. Remove side camera (RH) screws.
6. Remove side camera (RH).
INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. See: Testing and Inspection/Programming and Relearning/Calibrating Camera Image (Around View
Monitor)/Work Procedure/Navigation (Single Monitor).
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera,
removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.
Navigation (Twin Monitor)
SIDE CAMERA RH
Removal and Installation
REMOVAL
1. Remove glass mirror (passenger side). See: Body and Frame/Mirrors/Service and Repair/Outside Mirror/Door Mirror Assembly/Exploded
View/Without ADP(without ADP), See: Body and Frame/Mirrors/Service and Repair/Outside Mirror/Door Mirror Assembly/Exploded
View/With ADP (with ADP).
2. Remove screws (A) and actuator connector, and then actuator
(1).