FX35 RWD V6-3.5L (VQ35HR) (2010)
Garage Door Opener Transmitter: Testing and Inspection
Integrated Homelink Transmitter
Component Description
INTEGRATED HOMELINK TRANSMITTER
Component Description
Component Function Check
INTEGRATED HOMELINK TRANSMITTER
Component Function Check
1.CHECK FUNCTION
Check that system receiver (garage door opener, etc.) operates with original hand-held transmitter.
Is the inspection result normal?
YES - GO TO 2.
NO - Receiver or hand-held transmitter is malfunctioning.
2.CHECK ILLUMINATE
1. Turn ignition switch OFF.
2. Does red light of transmitter illuminate when any transmitter button is pressed?
Is the inspection result normal?
YES - GO TO 3.
NO - See: Diagnosis Procedure.
3.CHECK TRANSMITTER
Check transmitter with Tool*.
*:For details, refer to Technical Service Bulletin.
Is the inspection result normal?
YES - Receiver or hand-held transmitter malfunction, not vehicle related.
NO - Replace auto anti-dazzling inside mirror (homelink universal transceiver). See: Body and Frame/Mirrors/Service and Repair/Inside
Mirror/Removal and Installation/With ADP (with ADP) or See: Body and Frame/Mirrors/Service and Repair/Inside Mirror/Removal and
Installation/Without ADP (Without ADP).
Diagnosis Procedure
INTEGRATED HOMELINK TRANSMITTER
Description
Integrated Homelink Transmitter can store and transmit a maximum of 3 radio signals.
Allows operation of garage doors, gates, home and office lighting, entry door locks and security system, etc.
Integrated Homelink Transmitter power supply uses vehicle battery, which enables it to maintain every program in case battery is discharged or
removed.
INTEGRATED HOMELINK TRANSMITTER
Diagnosis Procedure
1.CHECK POWER SUPPLY
1. Turn ignition switch OFF.
2. Disconnect auto anti-dazzling inside mirror (homelink universal transceiver) connector.
3. Check voltage between auto anti-dazzling inside mirror (home link universal transceiver) harness connector and ground.