FX35 RWD V6-3.5L (VQ35HR) (2010)
Memory Positioning Module: Service and Repair
Removal and Replacement
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the instrument driver lower panel. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Installation.
2. Remove the screws (A).
3. Remove automatic drive positioner control unit (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. See: Testing and Inspection/Programming and
Relearning/Additional Service When Removing Battery Negative Terminal/Description.