infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

System Diagram|Page 5883 > < System Diagram|Page 5881
Page 7
background image

AUXILIARY INPUT FUNCTION
-

Image and sound can be output from an external device by connecting a device with auxiliary input jacks.

-

AUX image signals are transmitted to the display unit and AUX sound signals are transmitted to each speaker via BOSE amp.

USB CONNECTION FUNCTION
-

Connecting iPod® or USB memory allows the driver to play iPod® music files or USB memory-stored music files, video data, and image viewer
data.

-

Sound signals of music files stored in iPod® or USB memory are transmitted from the USB connector to the

AV control unit. The AV control unit transmits the sound signals to the woofer and each speaker via BOSE amp.
-

Video signals and image viewer file signals are transmitted from the USB connector to the AV control unit.

The data and files are displayed on the front display unit screen.
-

iPod® is recharged when connected to USB connector.

-

Only files that meet the following conditions will be played.

NOTE:
-

iPod® is a trademark of Apple inc., registered in the U.S. and other countries.

-

Image signals cannot be received from iPod®.

-

Use the enclosed USB harness when connecting iPod® to USB connector.

VOICE RECOGNITION FUNCTION
-

Each operation of multi AV system can be performed by inputting sound to microphone.

-

Start of sound recognition system can be performed by steering switch.

TOUCH PANEL SYSTEM
Each operation of multi AV system can be performed by directly touching a display.

AROUND VIEW MONITOR FUNCTION
-

This system is equipped with wide-angle high-resolution cameras on the front and rear of the vehicle and on both right and left door mirrors. The
images from front view, rear view, front-side view (RH side), and birds-eye view that shows the view from the top of the vehicle are displayed to
monitor the vehicle surroundings.

-

Around view monitor control unit cuts out and expands the image received from each camera to create each view.

-

The sonar indicator is displayed on display (superimposed on the camera image) in combination with the camera assistance sonar system to warm
of the approach of an obstacle.

-

In front view and rear view, the vehicle width, distance lines and predictive course lines are superimposed and displayed. In front-side view, the
vehicle distance guiding line and vehicle width guiding line are displayed.

-

The Birds-Eye view converts the images from 4 cameras into the overhead view and displays the status of the vehicle on display. The vehicle icon
and sonar indicator that are displayed on the Birds-Eye view display are rendered by around view monitor control unit.

Around View Monitor Screen
-

Around view monitor combines and displays the travel direction view and "Birds-Eye view", "Front-Side view" and then it displays the sonar
indicator on the "Birds-Eye view", "Front-Side view""Rear wide view".

-

AV control unit renders the "Change View" switch, view icon, warning message on display.

Screen constitution

System Diagram|Page 5883 > < System Diagram|Page 5881