FX35 RWD V6-3.5L (VQ35HR) (2010)
Color and blinking cycle of sonar indicator
Sonar Buzzer Operation
-
Each sonar sensor transmits a sensor signal to the sonar control unit when detecting an obstacle.
-
The sonar control unit converts a signal received from each sonar sensor into distance and transmits detection distance signal to the AV control
unit via AV communication.
-
The AV control unit transmits a buzzer signal to the BOSE amp. corresponding to each sonar sensor based on the received signal.
-
When receiving a buzzer signal, the BOSE amp. transmits the buzzer signal to the each speaker. When each speaker receives a buzzer signal, a
buzzer sounds.
-
When the front corner sensor detects an obstacle, a buzzer is heard from the speakers on the front side.
-
When the rear corner sensor detects an obstacle, a buzzer is heard from the speakers on the rear side.
-
It changes the buzzer cycle in 3 stages according to the detection distance.
Sonar buzzer cycle
VEHICLE INFORMATION FUNCTION
-
Status of audio, climate control system, fuel economy, maintenance and navigation are displayed.
-
AV control unit displays the fuel consumption status while receiving data signal through CAN communication from ECM, unified meter and A/C
amp.
-
AV control unit is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function.
Navigation (Twin Monitor)
SYSTEM
MULTI AV SYSTEM : System Description
Multi AV system means that the following systems are integrated.