FX35 RWD V6-3.5L (VQ35HR) (2010)
3. Press the sonar sensor (1) outside the front bumper, pressing the metal clips on the back to the direction of black arrows.
INSTALLATION
Install the bumper when the pawl engages.
CAUTION:
The connector direction is within ±10° from the horizontal position when assembling the bumper.
A : Horizontal position
a : 10 degrees
Navigation (Twin Monitor)
SONAR SENSOR
FRONT : Removal and Installation
REMOVAL
1. Remove fender protector. Keep a service area. See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Fender
Protector/Exploded View.
2. Remove sonar sensor connector.
3. Press the sonar sensor (1) outside the front bumper, pressing the metal clips on the back to the direction of black arrows.
INSTALLATION
Install the bumper when the pawl engages.
CAUTION: