FX35 RWD V6-3.5L (VQ35HR) (2010)
Front Door Striker: Service and Repair
Removal and Installation
FRONT DOOR
DOOR STRIKER : Removal and Installation
REMOVAL
1. Remove door striker cover.
2. Remove TORX bolts, and then remove door striker.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Apply genuine high strength locking sealant or equivalent onto TORX bolts.
-
After installation, check door open/close, lock/unlock operation.
-
After installation, perform the fitting adjustment. See: Adjustments.