FX35 RWD V6-3.5L (VQ35HR) (2010)
Removal and Installation
LUGGAGE FLOOR TRIM
Removal and Installation
REMOVAL
LUGGAGE REAR PLATE
1. Fully open back door.
2. Remove tonneau cover assembly.
3. Open and pull luggage finisher center (1) backwards, till the bolts are visible.
4. Remove both bolts and then remove luggage finisher center.
Black arrow : Bolt
5. Remove the clip (A), disconnect the woofer harness connector
(B), and then remove the woofer (1) and spire tire (2). See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service
and Repair/Woofer/Removal and Installation/Navigation (Twin Monitor).
6. Remove the rear seat assembly. See: Seats/Service and Repair/Rear Seat/Removal and Installation.
7. Remove the luggage floor finisher front (LH/RH).
8. Remove back door weather-strip.