FX35 RWD V6-3.5L (VQ35HR) (2010)
Trunk / Liftgate Striker: Service and Repair
Removal and Installation
BACK DOOR
BACK DOOR STRIKER : Removal and Installation
REMOVAL
1. Remove luggage rear plate mask. See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Luggage Floor Trim/Removal and Installation.
2. Remove mounting bolts, and then remove back door striker.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
After installation, check back door open/close, lock/unlock operation.
-
After installation, perform the fitting adjustment. See: Adjustments.