FX35 RWD V6-3.5L (VQ35HR) (2010)
Seat Memory Switch: Service and Repair
Removal and Replacement
SEAT MEMORY SWITCH
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the front door finisher (1). See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Installation.
2. Press pawls and remove seat memory switch (2) from front door finisher (1).
Triangle : Pawl
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. See: Testing and Inspection/Programming and
Relearning/Additional Service When Removing Battery Negative Terminal/Description.