FX35 RWD V6-3.5L (VQ35HR) (2010)
Power Seat Switch: Service and Repair
Side Support Switch
SIDE SUPPORT SWITCH
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the seat cushion outer finisher (1). See: Service and Repair/Front Seat/Removal and Installation.
2. Remove the screws (A).
3. Remove side support switch (2) from the seat cushion outer finisher.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Clamp the harness in position.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. See: Memory Positioning Systems/Testing and
Inspection/Programming and Relearning/Additional Service When Removing Battery Negative Terminal/Description.