FX35 RWD V6-3.5L (VQ35HR) (2010)
/Page-1817009.png)
^
Resistance value given at room temperature or about 25°C / 77°F.
c. If resistance value is more or less than listed above replace the TED.
NOTE:
The sensor is part of the TED. To replace the sensor replace the TED.
Seat Back
a. Disconnect TED connector.
^
Connector # B504 - driver side
^
Connector # B514 - passenger side
b. Measure TED resistance across pin 37 (green wire) and pin 38 (also green wire).
^
Acceptable resistance value: 1.3 - 1.8 ohms.
^
Acceptable resistance value: Approximately 1000 ohms.
c. If resistance value is more or less than listed above, replace the TED.
NOTE:
The sensor is part of the TED. To replace the sensor replace the TED
Climate Controlled Seat Blower Motor
Check 1:
