FX35 RWD V6-3.5L (VQ35HR) (2010)
-
Align concave of cowl top cover RH (1) to windshield glass (2) pin
(A) as shown in the figure when installing.
-
Slide the pawl while aligning with the concave part of (C).
-
Engage the joint of pawl of (A) with (B), and then assemble cowl top covers LH (1) and RH (2).
CAUTION:
-
Always replace EPT sealer with a new one, if the cowl top cover is reused.
-
After installing, perform adjustment of wiper arm. See: Wiper and Washer Systems/Wiper Arm/Adjustments/Front Wiper Arm and
Blade.