FX35 RWD V6-3.5L (VQ35HR) (2010)
Wheel Speed Sensor: Service and Repair
Rear Sensor Rotor
Exploded View
SENSOR ROTOR
REAR SENSOR ROTOR : Exploded View
Removal and Installation
SENSOR ROTOR
REAR SENSOR ROTOR : Removal and Installation
REMOVAL
-
Follow the procedure below to remove rear sensor rotor.
- Remove side flange. [R200 (2WD)], See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Exploded View [R200
(AWD)], (R230).
- Using a bearing replacer (suitable tool) and puller (suitable tool), remove sensor rotor from side flange.
INSTALLATION
CAUTION:
Never reuse sensor rotor.
-
Follow the procedure below to install rear sensor rotor.
- Using a drifts, press rear sensor rotor onto side flange.
A: Drift [SST: ST30720000 (J-25405)]
B: Drift [SST: ST27863000 ( - )]
C: Drift [SST: KV40104710 ( - )]
- Install side flange.
[R200 (2WD)], See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Exploded View [R200 (AWD)] DLN-275,
"Exploded View" (R230).