FX35 RWD V6-3.5L (VQ35HR) (2010)
Brake Pedal Assy: Adjustments
BRAKE PEDAL
Inspection and Adjustment
INSPECTION AFTER REMOVAL
-
Check the following items and replace the brake pedal assembly if necessary.
- Check the brake pedal upper rivet (made by aluminum) (A) for deformation.
- Check the brake pedal for bend, damage, and cracks on the welded parts.
- Check the lapping length (X) of sub-bracket (B) and slide plate (C).
Standard
X : 5.0 mm (0.197 in) or more
-
Check clevis pin and plastic stopper (A) for damage and deformation. If any damage is found, replace clevis pin.
ADJUSTMENT AFTER INSTALLATION
Perform the brake pedal adjustment after installing the brake pedal assembly. See: Service and Repair/Inspection and Adjustment.
BRAKE PEDAL
Inspection and Adjustment
INSPECTION
Brake Pedal Height
Check the brake pedal height (H1) between the dash lower panel (1) and the brake pedal upper surface.