FX35 RWD V6-3.5L (VQ35HR) (2010)
Removal and Installation
REAR DISC BRAKE
BRAKE PAD (2 PISTON TYPE) : Removal and Installation
REMOVAL
WARNING:
Clean any dust from the brake caliper and brake pads with a vacuum dust collector. Never blow with compressed air.
CAUTION:
-
Never depress the brake pedal while removing the brake pads or the cylinder body because the piston may pop out.
-
Never spill or splash brake fluid on the disc rotor and caliper.
1. Remove tires with power tool.
2. Remove clips from pad pins.