FX35 RWD V6-3.5L (VQ35HR) (2010)
7. Remove timing chain tensioners (secondary) (1) from cylinder head.
A : Bank 1
B : Bank 2
-
Remove timing chain tensioners (secondary) with its stopper pin (C) attached.
NOTE:
Stopper pin should be attached when timing chain (secondary) is removed.
INSTALLATION
1. Install timing chain tensioners (secondary) on both sides of cylinder head.
-
Install timing chain tensioners (1) with its stopper pin (C) attached.
Bank 1 side (A) : Sliding part facing downward
Bank 2 side (B) : Sliding part facing upward
2. Install valve lifter.
-
Install it in the original position.
3. Install camshafts.
-
Follow your identification marks made during removal, or follow the identification marks that are present on new camshafts for proper placement
and direction.
White arrow : Engine front