FX35 RWD V6-3.5L (VQ35HR) (2010)
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
-
Check drive belt is securely installed around all pulleys.
-
Check drive belt is correctly engaged with the pulley groove.
-
Check for engine oil and engine coolant are not adhered drive belt and pulley groove.
Inspection
DRIVE BELT
Inspection
INSPECTION AFTER INSTALLATION
-
Turn crankshaft pulley clockwise several times to equalize tension between each pulley, and then confirm tension of drive belt at indicator (notch
on fixed side) is within the possible use range. See: Exploded View.