FX35 RWD V6-3.5L (VQ35HR) (2010)
8. Install new O-rings (1) on rear timing chain case.
A : Bank 1
B : Bank 2
9. Install new front oil seal on front timing chain case.
-
Apply new engine oil to both oil seal lip (A) and dust seal lip
(B).
White arrow : Engine inside
Black arrow : Engine outside
-
Install it so that each seal lip is oriented as shown in the figure.
-
Using a suitable drift [outer diameter: 60 mm (2.36 in)] (A), press-fit oil seal until it becomes flush with front timing chain case end face.
-
Check the garter spring is in position and seal lip is not inverted.
10. Install front timing chain case as per the following:
-
Check O-rings stay in place during installation to rear timing chain case.