FX35 RWD V6-3.5L (VQ35HR) (2010)
Is the inspection result normal?
YES - GO TO 4.
NO - Repair harness or connector.
4.CHECK INTAKE DOOR MOTOR GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect intake door motor connector.
3. Check continuity between intake door motor harness connector and ground.
Is the inspection result normal?
YES - Replace intake door motor.
NO - Repair harness or connector.
5.CHECK INTAKE DOOR CONTROL LINKAGE
Check intake door control linkage is properly installed. See: Service and Repair/Exploded View.
Is it installed normally?
YES - INSPECTION END
NO - Repair or adjust control linkage.