FX35 RWD V6-3.5L (VQ35HR) (2010)
Heater Core: Service and Repair
Heater Core
HEATER & COOLING UNIT ASSEMBLY
HEATER CORE : Removal and Installation
REMOVAL
1. Remove heater & cooling unit assembly. See: Exploded View.
2. Remove mounting screws (A), and then remove heater pipe cover (1).
3. Remove mounting screws (B), and then remove foot duct (left)
(2).
4. Slide heater core (3) to leftward (as shown in the figure).
INSTALLATION
Installation is basically the reverse order of removal.
NOTE:
See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair/Refilling when filling radiator with engine coolant.