FX35 RWD V6-3.5L (VQ35HR) (2010)
3. Remove mounting bolt (A) from high-pressure flexible hose bracket (1).
4. Disconnect one-touch joint between high-pressure flexible hose
(2) and condenser pipe assembly (3) with disconnector (B)
(SST: 9253089912).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable material such as vinyl tape to avoid the entry of air.
5. Remove mounting nut (A), and then remove high-pressure flexible hose (1).
CAUTION:
Cap or wrap the joint of the A/C piping and compressor with suitable material such as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Replace O-rings with new ones. Then apply compressor oil to them when installing.
-
Female-side piping connection is thin and easy to deform. Slowly insert the male-side piping straight in axial direction.
-
Insert piping securely until a click is heard.
-
After piping connection is completed, pull male-side piping by hand to make sure that connection does not come loose.
-
Check for leakages when recharging refrigerant.
High-Pressure Pipe 1
COOLER PIPE AND HOSE
HIGH-PRESSURE PIPE 1 HIGH-PRESSURE PIPE 1 : Removal and Installation
REMOVAL
1. Remove low-pressure flexible hose and low-pressure pipe 2. See: Exploded View.