FX35 RWD V6-3.5L (VQ35HR) (2010)
5. Remove mounting bolts (A) from condenser pipe assembly (1).
6. Disconnect one-touch joint between high-pressure flexible hose
(1) and condenser pipe assembly (3) with disconnector (A)
(SST: 9253089912).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable material such as vinyl tape to avoid the entry of air.
7. Disconnect one-touch joint between high-pressure pipe 1 (2) and condenser pipe assembly with disconnector (A) (SST:
9253089908).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable material such as vinyl tape to avoid the entry of air.
8. Remove condenser pipe assembly.
CAUTION:
Cap or wrap the joint of the A/C piping and condenser with suitable material such as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Replace O-rings with new ones. Then apply compressor oil to them when installing.
-
Female-side piping connection is thin and easy to deform. Slowly insert the male-side piping straight in axial direction.
-
Insert piping securely until a click is heard.
-
After piping connection is completed, pull male-side piping by hand to make sure that connection does not come loose.
-
Check for leakages when recharging refrigerant.