FX35 RWD V6-3.5L (VQ35HR) (2010)
License Plate Bulb: Service and Repair
LICENSE PLATE LAMP
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove the fuse.
-
Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
-
Never touch bulb by hand while it is lit or right after being turned off.
-
Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When
replacing bulb, be sure to replace it with new one.
LICENSE PLATE LAMP BULB
1. Remove the back door finisher inner. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service
and Repair/Back Door Trim/Exploded View.
2. Rotate the bulb socket (1) counterclockwise and unlock it.
3. Remove the bulb (2) from the socket.