infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Relays and Modules - Lighting and Horns > < Lighting - Exterior Lamp Fogging Inspection|Page 7287
Page 1
background image

Parking Light Bulb: Service and Repair

REAR COMBINATION LAMP

Replacement

CAUTION:
-

Disconnect the battery negative terminal or remove the fuse.

-

Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.

-

Never touch bulb by hand while it is lit or right after being turned off.

-

Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When
replacing bulb, be sure to replace it with new one.

STOP/TAIL LAMP
Replacement integral with rear combination lamp assembly.  See: Service and Repair/Exploded View.

REAR SIDE MARKER LAMP BULB
1. Remove the rear combination lamp.  See: Service and Repair/Exploded View.
2. Rotate the rear side marker lamp bulb socket counterclockwise and unlock it.
3. Remove the bulb from the rear side marker lamp bulb socket.

REAR TURN SIGNAL LAMP BULB
1. Remove the rear combination lamp.  See: Service and Repair/Exploded View.
2. Rotate the rear turn signal lamp bulb socket counterclockwise and unlock it.
3. Remove the bulb from the rear turn signal lamp bulb socket.

Relays and Modules - Lighting and Horns > < Lighting - Exterior Lamp Fogging Inspection|Page 7287