FX35 RWD V6-3.5L (VQ35HR) (2010)
Vanity Lamp: Service and Repair
Replacement
VANITY MIRROR LAMP
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove the fuse.
-
Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after it turns OFF.
-
Never leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of lamp. When
replacing bulb, always replace it with new one.
VANITY MIRROR LAMP BULB
1. Insert any appropriate tool into the gap between the lens. Remove the lens.
2. Remove the bulb.