FX35 RWD V6-3.5L (VQ35HR) (2010)
Drive Belt: Removal and Replacement
Exploded View
DRIVE BELT
Exploded View
Removal and Installation
DRIVE BELT
Removal and Installation
REMOVAL
1. Remove engine undercover with power tool.
2. While securely holding the square hole (A) in pulley center of auto tensioner (1) with a spinner handle, move spinner handle in the direction of
arrow (loosening direction of drive belt).
Black arrow : Loosening direction of drive belt
CAUTION:
Never place hand in a location where pinching may occur if the holding tool accidentally comes off.
3. Under the above condition, insert a metallic bar of approximately
6 mm (0.24 in) in diameter [hexagonal wrench (C) shown as example in the figure] through the holding boss (B) to lock auto-tensioner pulley arm.
4. Remove drive belt.