FX35 RWD V6-3.5L (VQ35HR) (2010)
Terms
HOW TO USE THIS MANUAL
Terms
-
The captions WARNING and CAUTION warn you of steps that must be followed to prevent personal injury and/or damage to some part
of the vehicle.
WARNING indicates the possibility of personal injury if instructions are not followed.
CAUTION indicates the possibility of component damage if instructions are not followed.
BOLD TYPED STATEMENTS except WARNING and CAUTION give you helpful information.
Standard value: Tolerance at inspection and adjustment.
Limit value: The maximum or minimum limit value that should not be exceeded at inspection and adjustment.
Units
HOW TO USE THIS MANUAL
Units
-
The UNITS given in this manual are primarily expressed as the SI UNIT (International System of Unit), and alternatively expressed in
the metric system and in the yard/pound system.
Also with regard to tightening torque of bolts and nuts, there are descriptions both about range and about the standard tightening torque.
"Example"
Range
Outer Socket Lock Nut : 59 - 78 Nm (6.0 - 8.0 kg-m, 43 - 58 ft-lb)
Standard
Drive Shaft Installation Bolt : 44.3 Nm (4.5 kg-m, 33 ft-lb)