FX35 RWD V6-3.5L (VQ35HR) (2010)
2. Check the continuity between the ICC sensor integrated unit harness connector and the brake booster control unit harness connector.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair the ICC sensor integrated unit branch line. (ITS communication line). See: Component Tests and General Diagnostics/Malfunction Area
Chart/System Diagram.
4.CHECK HARNESS CONTINUITY (SHORT CIRCUIT)
1. Disconnect the connector of accelerator pedal actuator.
2. Check the continuity between the ICC sensor integrated unit harness connector terminals.
Is the inspection result normal?
YES - GO TO 5.
NO - Check the harness and repair or replace (if shield line is short) the root cause.
5.CHECK HARNESS CONTINUITY (SHORT CIRCUIT)
Check the continuity between the ICC sensor integrated unit harness connector and the ground.
Is the inspection result normal?
YES - GO TO 6.
NO - Check the harness and repair or replace (if shield line is short) the root cause.
6.CHECK TERMINATION CIRCUIT
1. Remove the ICC sensor integrated unit and the brake booster control unit.
2. Check the resistance between the ICC sensor integrated unit terminals.
1 : ICC sensor integrated unit and brake booster control unit
3. Check the resistance between the brake booster control unit terminals.