FX35 RWD V6-3.5L (VQ35HR) (2010)
d. Pull quick connector by hand holding position (A). Check it is completely engaged (connected) so that it does not come out from centralized
under-floor piping (1).
e. Install quick connector cap (3) to quick connector connection.
1 : Centralized under-floor piping
2 : Fuel feed hose
B : Under view
-
Install quick connector cap with arrow (A) on surface facing the direction of quick connector (fuel feed hose side).
CAUTION:
If quick connector cap cannot be installed smoothly, quick connector may have not be installed correctly. Check the connection again.
10. Install in the reverse order of removal after this step.