FX35 RWD V6-3.5L (VQ35HR) (2010)
Start / Stop Switch: Component Tests and General Diagnostics
Component Function Check
KEY WARNING LAMP
Component Function Check
1.CHECK FUNCTION
Check the operation with "INDICATOR" in "Active Test" mode with CONSULT-III.
Is the inspection result normal?
YES - Key warning lamp in combination meter is OK.
NO - See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Component Tests and General Diagnostics/Key
Warning Lamp/Diagnosis Procedure.
Diagnosis Procedure
KEY WARNING LAMP
Description
Performs operation method guide and warning together with buzzer.
KEY WARNING LAMP
Diagnosis Procedure
1.CHECK KEY WARNING LAMP
See: Instrument Panel, Gauges and Warning Indicators/Testing and Inspection/Scan Tool Testing and Procedures/CONSULT-III Function.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace harness.
2.CHECK INTERMITTENT INCIDENT
See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Intermittent Incident.
- INSPECTION END