FX35 RWD V6-3.5L (VQ35HR) (2010)
Alignment: Service and Repair
Wheel Alignment
WHEEL ALIGNMENT
Adjustment
CAMBER
If camber is exceeds the standard value, adjust with adjusting bolt
(1) in front lower link (2).
Camber: Refer to RSU-23, "Wheel Alignment". See: Specifications/Rear Suspension/Wheel Alignment
CAUTION:
After adjusting camber, be sure to check toe-in.
TOE-IN
Without RAS
-
If toe-in is exceeds the standard value, adjust with adjusting bolt
(1) in rear lower link (2).
Toe-In: Refer to RSU-23, "Wheel Alignment". See: Specifications/Rear Suspension/Wheel Alignment
CAUTION:
Be sure to adjust equally on right and left side with adjusting bolt.
- If toe-in is not still within the specification, inspect and replace any damaged or worn suspension parts.
With RAS