FX35 RWD V6-3.5L (VQ35HR) (2010)
Power Steering Pump: Service and Repair
Disassembly and Assembly
POWER STEERING OIL PUMP
VQ35HR : Disassembly and Assembly
DISASSEMBLY
1. Remove rear cover mounting bolts, and then remove rear cover from body assembly.
CAUTION:
-
Fix oil pump with a vise if necessary.
-
Use copper plates when fixing with a vise.
2. Remove O-ring from body assembly.
3. Remove rear side plate from cartridge, and then remove Teflon ring and O-ring from rear side plate.
4. Remove rotor snap ring using a snap ring pliers, and remove pulley from body assembly.
CAUTION:
Remove pulley so as not to be damaged when removing rotor snap ring.
5. Remove cartridge and front side plate.
6. Remove flow control valve A (1), flow control valve spring (2) and flow control valve B assembly (3) from body assembly (4).
CAUTION:
Never drop and damage flow control valve A and flow control valve B assembly when removing.
7. Remove oil seal from body assembly.
8. Remove mounting bolt of suction pipe, and then remove suction pipe from body assembly.
9. Remove O-ring from body assembly.
10. Remove bracket mounting bolts, and then remove bracket from body assembly.
ASSEMBLY