FX35 RWD V6-3.5L (VQ35HR) (2010)
Stabilizer Bar: Removal and Replacement
Exploded View
FRONT STABILIZER
Exploded View
Removal and Installation
FRONT STABILIZER
Removal and Installation
REMOVAL
1. Remove under cover with power tool.
2. Remove stabilizer connecting rod with power tool.
CAUTION:
Apply a matching mark to identify the installation position.
3. Remove stabilizer clamp and stabilizer bushing.
4. Remove stabilizer bar.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Check the matching mark when installing.
-
Tighten the mounting nut to the specified torque while holding a hexagonal part of stabilizer connecting rod side.
Exploded View
REAR STABILIZER
Exploded View
STABILIZER CLAMP FIXING METHOD : NUT