FX35 RWD V6-3.5L (VQ35HR) (2010)
STABILIZER CLAMP FIXING METHOD : BOLT
Removal and Installation
REAR STABILIZER
Removal and Installation
REMOVAL
1. Remove center muffler. See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Removal and Replacement/Exploded View
(VQ35HR), See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Removal and Replacement/Exploded View (VK50VE).
2. Remove under cover.
3. Remove stabilizer connecting rod mounting nuts (lower side) with power tool, and remove stabilizer connecting rod from stabilizer bar.
4. Remove stabilizer connecting rod mounting nuts (upper side) with power tool, and remove stabilizer connecting rod from stabilizer connecting rod
mounting bracket.
5. Remove mounting bolts or nuts on stabilizer clamp with power tool, and remove stabilizer bar.
6. Remove stabilizer connecting rod mounting bracket.