FX35 RWD V6-3.5L (VQ35HR) (2010)
Suspension Control Module: Service and Repair
Removal and Installation
E-SUS CONTROL UNIT
Removal and Installation
REMOVAL
1. Turn the ignition switch OFF.
2. Remove the luggage side finisher lower (LH). See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Luggage Floor Trim/Exploded View.
3. Disconnect the E-SUS control unit connector.
4. Remove the E-SUS control unit mounting bolts.
5. Remove the E-SUS control unit from vehicle.
INSTALLATION
Install in the reverse order of removal.