FX35 RWD V6-3.5L (VQ35HR) (2010)
18. Remove brackets from vehicle floor panel.
19. Remove selector lever position indicator from console finisher assembly:
a. Remove indicator assembly from console finisher assembly. See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Exploded View.
b. Remove insert finisher from indicator assembly.
c. Remove selector lever position indicator.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Apply multi-purpose grease on the pin surface (that slides after installing a collar) of the pivot pin.
-
Refer to the followings when installing selector lever knob to A/T shift selector assembly.
1. Insert lock pin to selector lever knob.
2. Install selector lever knob over selector lever until a click is felt.
CAUTION:
-
Install it straight, and never tap or apply any shock to install it.
-
Never push selector button.
-
When installing control rod to A/T shift selector assembly, refer to "ADJUSTMENT". See: Adjustments/7AT RE7R01B.
Inspection and Adjustment
A/T SHIFT SELECTOR
Inspection and Adjustment
INSPECTION AFTER INSTALLATION
Check A/T positions after adjusting A/T positions. See: Adjustments/7AT RE7R01B.
ADJUSTMENT AFTER INSTALLATION
Adjust A/T positions. See: Adjustments/7AT RE7R01B.
Exploded View
PADDLE SHIFTER
Exploded View