FX45 AWD V8-4.5L (VK45DE) (2006)
Cowl: Service and Repair
COWL TOP
Removal and Installation
REMOVAL
1. Remove clips of hood ledge cover and remove hood ledge cover.
2. Remove wiper arms (RH/LH). Refer to "Removal and Installation of Front Wiper Arms, Adjustment of Wiper Arms Stop Location".
3. Remove cowl top seal rubber.
4. Remove clips of cowl top cover (RH) and remove cowl top cover (RH).
5. Remove clips, cap and bolts and remove cowl top cover (LH).
6. Remove washer hose from cowl top cover.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
When installing cowl top cover, make sure that blind clips are securely fitted in panel holes on body, and then press them in.
-
After installing, perform adjustment of wiper arms. Refer to WW-33, "Removal and Installation of Front Wiper Arms, Adjustment of Wiper Arms
Stop Location". See: Wiper and Washer Systems/Wiper Arm/Adjustments/Front Wiper System