FX45 AWD V8-4.5L (VK45DE) (2006)
Upper Side Moulding / Trim: Service and Repair
Rear
REAR DOOR OUTSIDE MOLDING
Removal
1. Open windows fully.
2. Disconnect pawl on front edge and rear edge of molding.
3. Lift up to upper side, and remove molding.
Installation
Install in the reverse order of removal.
CAUTION:
-
Be careful not to apply excessive force when removing because it is easy deform parts.
-
After removal, visually inspect molding, and it is deformed, replace it with new molding.