FX45 AWD V8-4.5L (VK45DE) (2006)
^
Make sure the rivets in the upper part of brake pedal are not deformed.
^
Make sure that joint length L of sub-bracket and sliding plate is 5.5 mm (0.217 inch) or more.
^
Replace brake pedal assembly if any non-standard condition is detected.
^
Check clevis pin and plastic stopper for damage and deformation. Replace clevis pin if there are.
INSTALLATION
Installation in the reverse order of removal.
^
After installing brake pedal assembly to the vehicle, adjust brake pedal height.