FX45 AWD V8-4.5L (VK45DE) (2006)
1. Install in the reverse order of the removal.
2. Adjust parking brake pedal stroke to the specified stroke.
3. Perform parking brake break-in (drag run) operation by driving the vehicle under the following conditions:
Drive forward
^
Perform the following
^
Vehicle speed approx. 40 km/h (25 MPH) set (forward)
^
Parking brake operating force approx. 200 N (20.4 kg, 44.9 lbs.) set
^
Duration approx. 30 seconds
4. After break-in operation, check pedal stroke of parking brake. Readjust if it is no longer at the specified stroke.
^
To prevent lining from getting too hot, allow a cool off period of approximately 5 minutes after every break-in operation.
^
Do not perform excessive break-in operations, because it may cause uneven or early wear of lining.