infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Oil Cooler, Engine > < Environmental Impact Information|Page 2303
Page 1
background image

Engine Oil: Service and Repair

Changing Engine Oil 

WARNING:
^

Be careful not to burn yourself, as engine oil may be hot.

^

Prolonged and repeated contact with used engine oil may cause skin cancer; try to avoid direct skin contact with used engine oil. If skin
contact is made, wash thoroughly with soap or hand cleaner as soon as possible. 
 

1. Remove front engine undercover with power tool. 
2. Warm up engine, put vehicle horizontally and check for engine oil leakage from engine components.
3. Stop engine and wait for 15 minutes. 
4. Loosen oil filler cap, and then remove drain plug. 
5. Drain engine oil. 
6. Install drain plug with new washer. 

CAUTION:  Be sure to clean drain plug and install with new washer. 

Oil pan drain plug: 34.3 Nm (3.5 kg-m, 25 ft. lbs.) 

7. Refill with new engine oil. 

Engine oil specification and viscosity: Refer to Specifications.

CAUTION:  
^

The refill capacity depends on the engine oil temperature and drain time. Use these specifications for reference only. 

^

Always use oil level gauge to determine the proper amount of engine oil in engine. 

8. Warm up engine and check area around drain plug and oil filter for oil leakage. 
9. Stop engine and wait for 15 minutes. 

10. Check the engine oil level. 

Oil Cooler, Engine > < Environmental Impact Information|Page 2303