FX45 AWD V8-4.5L (VK45DE) (2006)
Catalytic Converter: Service and Repair
Exhaust System
Components
CAUTION:
^
Be sure to use genuine exhaust system parts or equivalents which are specially designed for heat resistance, corrosion resistance, and
shape.
^
Perform the operation with the exhaust system fully cooled down because the system will be hot just after engine stops.
^
Be careful not to cut your hand on the heat insulator edge.
Removal and Installation
REMOVAL
^
Disconnect each joint and mounting using power tool.
^
When removing main muffler, remove main muffler mounting bracket bolts.
^
Remove exhaust mounting bracket as follows:
1. Remove engine rear undercover.
2. Remove front cross bar.
3. Remove exhaust mounting bracket.
INSTALLATION
Note the following, and install in the reverse order of removal.
^
Tighten main muffler mounting bracket bolts in numerical order as shown in the figure.
CAUTION: