infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Headlamp Control Module > < Lighting - Xenon Headlamp Service Info.|Page 9416
Page 1
background image

Headlamp Bulb: Service and Repair

Bulb Replacement

HEADLAMP HIGH/LOW BEAM

1. Turn lighting switch OFF.
2. Disconnect the battery cable from the negative terminal or remove power fuse.
3. Remove air cleaner case (when replacing LH bulb). Refer to "AIR CLEANER AND AIR DUCT" (VK45) or refer to "AIR CLEANER AND AIR

DUCT" (VQ35).

4. Remove radiator reservoir tank (when replacing RH bulb). Refer to "RADIATOR" (VK45) or refer to "RADIATOR" (VQ35).
5. Turn plastic cap counterclockwise and unlock it.
6. Turn bulb socket counterclockwise and unlock it.
7. Unlock retaining spring and remove bulb from headlamp.
8. Installation is the reverse order of removal.

NOTE:  After installation, perform aiming adjustment. Refer to LT-34, "Aiming Adjustment".  See: Adjustments

Headlamp high/low beam (Xenon) : 12 V - 35 W (D2S)

DAYTIME/PARKING LAMP

1. Turn lighting switch OFF.
2. Remove air cleaner case (when replacing LH bulb of VK45).

Refer to "AIR CLEANER AND AIR DUCT".

3. Turn bulb socket counterclockwise and unlock it.
4. Remove bulb from its socket.
5. Installation is the reverse order of removal.

Daytime/Parking lamp : 12 V - 21/5 W

Headlamp Control Module > < Lighting - Xenon Headlamp Service Info.|Page 9416