FX45 AWD V8-4.5L (VK45DE) (2006)
/Page-1046035.png)
E.
Use a support jack to raise one corner of the rear suspension assembly until the bushing assembly is flush to the body. Tighten the nut until the nut
contacts the bushing inner sleeve.
F.
Repeat the same procedure on the other side.
G.
Use a support jack to raise one corner of the front suspension assembly until the assembly is flush to the body. Tighten the nut until the nut
contacts the bushing inner sleeve.
H.
Repeat the same procedure on the other side.
I.
Torque the front and rear suspension mounting nuts to 110 Nm (11 kg-m 81 ft.lb.)
NOTE:
